Good Advice for Taking Care of Casters

Do you have carts or other pieces of equipment that have casters on them? If this is the case, you need to do everything you can to take care of them. Doing this will help to ensure that you will not need to go out and buy more casters again any time soon. Buying casters on a regular basis is expensive. This is why it just makes good sense for you to learn all of the basic steps for keeping the casters you already have in working order. Here are a few tips that you can utilize in order to accomplish this goal.

  1. Check all of your casters on a regular basis in order to make sure they are not getting loose.

Casters have a tendency to get loose when they are used on a regular basis. This is a common problem that is easily fixed. All you need is a wrench to tighten the bolts that hold the casters in place. Using a ratchet will make this job even easier and faster than using a wrench. Many people wait until they start to hear the casters starting to squeak. However, you should be proactive. Check all of your plate casters once every month to make sure there are no problems. This will prolong their life and make them last much longer than they normally would.

  1. You should lubricate all of your casters on a regular basis.

Lubrication is the key to great caster performance. Unfortunately, most people are too lazy to lubricate their casters. This is a problem because the friction that is caused by casters that have not been lubricated will cause the wheels to wear out more quickly than they would if they had the proper lubrication.

  1. Be careful not to use your casters on surfaces that will damage the wheels.

Some casters are not designed to be used on certain surfaces. For example, the casters that are typically used in an office would not be suitable for use in warehouses with rough concrete. You need to make sure that you buy casters that are thick and very durable if you are going to be using them often on very rough surfaces. You can ask the company that made the casters to let you know which surfaces are appropriate to use them on. This will prevent you from damaging the casters.